The Official Pleasing Purchase Thread

[Taipan]

5ft wrecking bar £20!

[MrLongbeard]

Well they were supposed to be Global knives, but I reckon the wife would kill those in 5 minutes flat so bog basic average blades that I'll not get worked up about instead

[KungFooBob]

Shame, I might have been able to do you a good price on some Global, the 40th Anniversary sets G-52AN7 (there's A, B, C and D versions depending which vendor you get them from).

Still nearly double the price of the Ninja tho'

[MrLongbeard]

If I could lock them away and reserve them just for my use, I'd have a couple or 3 of 'em, but for some reason the wimmin in the house just abuse knives so I'm loathed to spend decent money on them.

[KungFooBob]

They've got a lifetime warranty, you should see some of the ones that come back, usually with the tips snapped off. They get reshaped, sharpened and sent back.

[Mr. Dazzle]

They've got a lifetime warranty, you should see some of the ones that come back, usually with the tips snapped off. They get reshaped, sharpened and sent back.

I have a 20cm Globan Ukon knife which I don't take much care of but it stands up just fine. Fundamentally it's just a lump of stainless steel after all, there's no real handle or anything I wouldn't' worried about them getting beat up, they sharpen up fine.

I was gonna get multiple Globals, but I ended up using this one classic Chef Knife for basically everything and never bothered with more.

[KungFooBob]

What you want is a GZ-2, now that's a cool knife.

Unless you've got lots of Global stuff, because it doesn't match anything else.

Edit: They're not out yet, it's a limited edition G-2, but in a cool black colour.

[Mr. Dazzle]

But still stainless?

I can't remember the name of the material (I bet @demographic can) but you can actually get Stainless to "corrode" and form a hard black surface with the right treatment. I've got an old submarine reactor valve which acts as a doorstop which has some of that finish.

Edit: your pic looks like that, hence why the ground edge of the blade is silver.

[KungFooBob]

I can't find the blurb now, but they're very cool in real life, only making 1000 of them and the uk is getting 300.

No.9 is sat on a desk in the next office, Id like to steal it.

[Taipan]

Well they were supposed to be Global knives, but I reckon the wife would kill those in 5 minutes flat so bog basic average blades that I'll not get worked up about instead

I've got those. They work really well, but I can never use that fiddly, bastard sharpener well enough!

[Mr. Dazzle]

I can't find the blurb now, but they're very cool in real life, only making 1000 of them and the uk is getting 300.

No.9 is sat on a desk in the next office, Id like to steal it.

I have IKEA stainless knives and forks done in the same finish, I suspect IKEA made meeeellions of them.

[MrLongbeard]

Well they were supposed to be Global knives, but I reckon the wife would kill those in 5 minutes flat so bog basic average blades that I'll not get worked up about instead

I've got those. They work really well, but I can never use that fiddly, bastard sharpener well enough!

The knife block / sharpener has already been consigned to the shed, I've got a Victorinox sharpener for cheap kitchen knives.

[demographic]

But still stainless?

I can't remember the name of the material (I bet @demographic can) but you can actually get Stainless to "corrode" and form a hard black surface with the right treatment. I've got an old submarine reactor valve which acts as a doorstop which has some of that finish.

Edit: your pic looks like that, hence why the ground edge of the blade is silver.

Black oxide coating, Magnetite?
Thought possibly phosphate (zinc?) coating but I've never seen that done on stainless.
Mebbe possible, I've just not seen it done.

[MyLittleStudPony]

They frit me up, those really sharp knives.

There's one in the kitchen but I very rarely use it as I worry I'd cut myself. I do use it to take the skin off fish but that's it.

I have some short, serrated Victorinox kitchen knives which I think were about £6 each and they're perfect for most of my needs.

[Yorick]

Never bothered cleaning a chain before, just banged more on top

But this is all they had in local shop. Cleaner is amazing and comes with cool cleaning brush.
And the lube doesn't fling off. Very pleased
.

20250904_135630.jpg (2.52 MiB) Viewed 958 times

[gremlin]

And the lube doesn't fling off. Very pleased

[ChrisW]

Decided it was time to relegate these to non-bike-riding duties as they may be on the verge or failing.

Or not? They've been excellent - think I've had them 5 years. They are genuinely waterproof - or a least 96.48% - are comfy and have a good CE rating, not that I've tested it. The laces are still perfect, too, tiny point but worth making.

I've ordered the exact same pair again today.

IMG_2326.jpeg (3.9 MiB) Viewed 900 times

[wheelnut]

Full carbon fibre SUP paddle. Also converts to kayak paddle. Daughter has a Temu app and I came across it for £70. Decent full CF paddles are 4 times that usually so I took a punt and ordered it.

It’s arrived and it seems really decent. Good quality and lovely and light. It will probably snap the first time I use it

[Silly Car]

New dinner suit for black tie events as previous one no longer fits me as it's falling off me

Today's purchase was two sizes smaller, jacket and trousers, than the suit I bought in April for a wedding and tailored fit rather than regular fit. Shirt collar size down over an inch as well

At 3 st 10lb lighter I need a whole new wardrobe

On a related note, what's the deal with Vinted for selling clothes?

[Pirahna]

On a related note, what's the deal with Vinted for selling clothes?

Wifey uses it. Take pictures and set your price, anyone interested will then haggle until a price is agreed. Pack it up and send it off. You won't the go to send it until they've payed for it, when they receive it you get the money. The payment includes postage.